Barfly1_14.lha,UL:AmiNet,DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet, A:1995028,TX:Barfly Assembler Development System Barfly Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here...!!! Barfly1_14.lha UL:AmiNet,DA 1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet, A:1995028,TX:Barfly Assembler Development System Barfly Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here...!!! Barfly1_14.lha UL:AmiNet,DA 1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet, A:1995028,TX:Barfly Assembler Development System Barfly Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here...!!! Barfly1_14.lha UL:AmiNet,DA 1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet, A:1995028,TX:Barfly Assembler Development System Barfly Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here...!!! Barfly1_14.lha,UL AmiNet,DA 1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet, A:1995028,TX:Barfly Assembler Development System Barfly Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here...!!! Barfly1_14.lha UL:AmiNet,DA 1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet, A:1995028,TX:Barfly Assembler Development System Barfly Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here...!!! Barfly1_14.lha UL:AmiNet,DA 1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet, A:1995028,TX:Barfly Assembler Development System Barfly Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here...!!! Barfly1_14.lha UL:AmiNet,DA 1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet, A:1995028,TX:Barfly Assembler Development System Barfly Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here... Barfly1_14 lha,UL:AmiNet DA:1995028,TX:Barfly Assembler Development System Barfly  Barfly 1.14 -  Barfly is a very powerful Assembler Development system with an Intuition controlled Sourcelevel Debugger that also supports SAS and GCC. Assembler: o Supports 68000..68060 and 6888x o VERY fast Source Passing o Arexx-Support o Enhanced Hunk and Section Support o Pre-Compiled Includes o Cached Includes & Incbins o Advanced Macro Support Functions o High-Level Macros o Enhanced SAS Smalldata Format o Advanced Peephole Optimizer o Multipass Optimizer Debugger: BDebug is an OS-Debugger that is based mainly on the Amiga Task concept and not on the Supervisor Mode. The Debugger can open unlimited debug sessions and the user is able to control these session simultaneous. The window amount is unlimited and fortunately BDebug is very configurable. The *SAS D1 Debug Hunk*, *GCC Stabs Debug Hunk*, a privat BASM Debug Hunk format, and the usual Symbol Hunk is supported. Support 68000..68040 and 6888x o Debug Methods: o Debug File o Debug Task  o Catch Next Task o Catch Crashed Task o Catch Enforcer Hits o ToolWindows: o RegWindow(1 for a session) o FPUWindow(1 for a session) o DissWindow(unlimited) o MemWindow(unlimited) o CoppWindow(unlimited) o SourceWindow(unlimited) o StructWindow(unlimited)->Include Structures are shown o BreakWindow(1 for a session) o WatchWindow(1 for a session) o ChecksumWindow(1 for a session) o SnoopWindow(1 for a session) o Unlimited Information Window o TaskWindow o SystemWindow o ProcessWindow o CLIWindow o HunkWindow o SymbolWindow o LibraryWindow->FD-Window->Autodocs/DissWindow o DeviceWindow o ResourceWindow o PortWindow o ResidentWindow o InterruptWindow o AutodocsWindow o Warm,Freeze and Kill Tasks o Trace Modes o Step 1 o Step X o Step DEBUG Line o Trace DEBUG Line o Trace over Calls o Trace X over Calls o Trace over OS-Calls o Trace on Flows o Trace on Address o Trace out of OS o Run Task o Run Watched Task o Run History Task->History trace o Register Undo and History Window o A lot more functions not listed here...!?!?!?!?!
ADisV1_3.lha,UL:AmiNet,DA:19950118,TX:'Intelligent' Disassembler. Includes source This  is  version  1.3  of ADis, an 'intelligent' disassembler for the Amiga.There  are no major modifications relative to V1.2 except the addition  of  the  missing  68040  FPU opcodes.  I have decided not to develop ADis any further myself and thus release it with source code. Unfortunately this is compiled with GCC using ixemul.library again.  I have  tried to compile it with libnix, but it didn't work correctly so I  assume a bug in libnix.
Asm_Kurs.lha,UL:AmiNet,DA:19941129,TX:How to code intros in assembler, German
GetLVO105.lha,UL:AmiNet,DA:19941226,TX:Old but good asm development tool FUNCTION GetLVO first of all attempts to get a path to the *_lib.fd files contained in the environment variable 'GETLVO'. If this fails, it uses its default setting: 'FD:'. Next it scans the libName_lib.fd file and any matches to 'funcName' is sent to stdout in this format: _LVOfuncName EQU -$ ; (parms,)(regs,) GetLVO might be useful as a quick reference to functions that you only vaguely remember or for creating *.
PhxAss_400.lha,UL:AmiNet,DA:19941231,TX:PhxAss V4.xx Macro Assembler PhxAss V4.xx is a highly optimizing macro assembler for Motorola's 680x0 CPUs, 6x FPUs and 68851 MMU (of course, the 030, 040 and 060 MMUs are also supported). It requires OS2.04 (V37) as a minimum and does no longer support older operating systems! (Kick 1.x owners: Get PhxAss V3.97) Most important features: o Fast: 15-3 lines per minute with standard Amigas, 5-2 with A4/040. o Symbolic and Source Level Debugging. o Automatic generation of executables (if possible).
snma_1_97.lha,UL:AmiNet,DA:19941212,TX:680x0/6888x amiga macro assembler SNMA is freeware conditional 680x0/688x macro assembler for the Amiga. It supports most common directives, generates Amiga object-files and/or executables. It is used mainly from the shell. Arexx port. AmigaOS 2.0+ only. AmigaGuide docs only. This is version 1.97. New features:   - LINE DEBUG HUNK (for source code debugging) - Support for small data model references - Multilevel optimizing - Boolean operators - Some new directives - + bug fixes
