-----------------------------------
 Things I want to do.
  Things I'll probably do sometime.
 Things already done.
 Things that are bad ideas.
-----------------------------------

 Speed up .FL via logtab

	 "-f#" Lets you force an event from the command line. This is great if
  you run TurboCit under a front end program such as BinkleyTerm.

	 Added "Default hall for new user" to the things you can toggle on for
  hall. Change by renaming an existing hall, or when creating a new
  one. Only one hall can be the default for new users. If none are
  selected, the root hall is the default.

	 Changed the #PRIVATE config variable. It is now a script rather then a
  single setting.

	 1	E-mail to SysOp in lobby
	 2	Create userlog entry
	 3	Information to a file, name, address, phone, and message
	 4	Run new user application (see #NEWUSERAPP)
	 5	Verify the user
	 6	not in use
	 7	not in use
	 8	Closed system, reads "CLOSESYS.BLB"
	 9	Hang up phone line

	 So you can now enter "219" to make a log entry, leave e-mail to the
  sysop, then hang up. Or any other combination you like. At TurboTech we
  used the old setting "13" (Info to file, with userlog entry). This would
  now be "239".

	 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
	 And just leaving the #PRIVATE blank is an open system. Like the old "0".
	 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

	 Created a "super" sysop type, it's called Remote-Sysop. They can do
  all those things a normal sysop can't from remote. This includes but is
  not limited to; room applications, room directories (even locked ones),
  groups (locked and hidden), exiting the BBS (watch out for this one!).

	 Fixed the cron file reading funtion to take longer lines. This was
  needed to hold all the 1/2 hours possible 0-48 on one line.

	 Added a new way to configure cron event times! You may now specify
 times you "don't" want the event to run using the "!" character.
  An example:

	 #HOURS   ANY !4 !5 !6 !7

	 The above would run any 1/2 hours except 4, 5, 6, and 7.

	 Also added to CRON.CIT time entry is the "-"  character. This allows
  you to specify a range of 1/2 hours to include or exclude. An example:

	 #HOURS   0-20 !4-7 !15-18

	 The above would run during the 1/2 hours of:
	 0 1 2 3 8 9 10 11 12 13 14 19 20

  *************************************************************************
  *Ŀ*
  *NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE*
  *																	  *
  *All cron events start with NO 1/2 hours selected. If you are going to*
  *exclude some hours, you need to set the 1/2 hours you do want with a *
  *range of of 1/2 hours or "ANY".                                      *
  *																	  *
  *NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE:NOTE*
  **
  *************************************************************************

 TCit now reports the time when a net callout fails.

  New config.cit keyword, #NEW_LOG_DAY, indicates the number of new accounts
  which can be created daily. Set to 0 if you don't want to use this option.
  If the maximum number of users per day is exceeded, the file newlogdy.blb 
  will be displayed and carrier will be dropped.

  Added forwarding code to incoming netmail so it gets properly forwarded 
  instead of just saved to the user. Network mail which is forwarded to another
  node will get "bounced" off the system with the name changed instead of being 
  saved to the message base.

  Fixed an inconsistancy in the DOOR code which would use 0 for the port of a 
  console user, and just the number for a remote user's port... While room
  apps have LOCAL for console and COMn for remote (command line parameters)

#FLUSH_KEYBOARD_BUFFER_ON_EXIT
 have bytesfree not allow upload if there is not enough free space (autouploads, & .ew)
 Net 69 E-Mail handling stuff
 Net 69 File transfers
 moderated messages may be still fucked up.

 have keyword search highlight word being searched for when msg is displayed
 moderator field to have rooms net between only two boards
 add moderate shit
 if carrier is lost read input.apl and msg.apl reliablly for call back verifier.
 .S!, .S@: when not logged in send modem str if #OFFHOOK when shelling, setup str after return
  Don't allow backspacing over ^A (del two characters)
 *Show ^A while editing, not while reading/Printing
  If overflowing on path, change some nodes to !'s
 Turbocit Remote sysop feature

  .Sysop Hall List now gives a lot more information.

  .Sysop Hall Kill and .Sysop Group Kill now prompt for removal of rooms/
  halls from the hall/group instead of just saying "go remove things".

  New NODES.CIT keywords- #NODUPCHECK and #LOGPACE
  #NODUPCHECK will skip duplicate checking for the node. This option should
  be used with EXTREME caution... It's only real application would be for
  gateways where you KNOW no duplicate messages will come over.
  #LOGPACE will pause for x milliseconds (1/1000th of a second) after every
  character when processing the #LOGIN script.


Create recursive makedir function
check for enough time if accounting is on when downloading
user configurable personal hall name
clean up getnode/readnode interface
in a moderated room .ee should default to the moderator
when doing a goto, check rooms in personal hall first
configurable whether or not fast method will be used or not for auxmem version 
  so that we can potentially save memory
indicate processor used in read status
if nmessages isn't big enough it screwes up on the auxmem version.
make sure copying of messages works perfectly (changeheader)
downloading from dialout
file points
livia goto
full screen editor
check hs-link return val
enter default hall should default to current default hall
hall info lines
make gremcit work perfectly with slightly older us robotics modems
bug in #netmail? nFindroom() in net 1.1
if a subboard has cron events don't run them when user terminates board
have .rh or .kh use algorhythm to list ALL accessible halls
some sort of progress thing for infofile stuff
last message in room has moreprompt if previous message scrolled screen
pad out msgs_nym for .k#
cron.tab userlog resynchrosintion
#logpurge
be able to disable users ability to kill own messages
option to print word count after saving message
make configurable if run new userapp even if user is verified
way to list address .K@
fix node login for !forcelogin
dialing directory
group only borders
command to read personal info
no. read and no. entered and uploaded stored in log
internal editor
questionarre
unixtime no. of seconds since 1970 in MCI
cit should not crash if there is no dictionary file.
if (forcelogin && calling && enter initials), dowhat=LOGIN instead of MAIN
stripansi() before adding address to ROUTE.CIT
Don't flag [received] after reading response from Sysop to XXX (me=Sysop)
Don't say old mail if only new mail
Incorrect number of new messages (e.g. -3L) in some rooms (e.g. Flame Warz)
long time doing infofiles stuff after upload
remove unnecessary flags room_inuse g_inuse h_inuse etc..
.a and .s fool user command
command line switch to turno status line off .. or keywords.. or just remeber damn setting
upload app/ for file scanning etc.
invite global user
maximum length settable for .ee to sysop for unlogged user
.KM (known match) keyword search for.
backspacing in DOT commands
a mode that shows all input from serial port
Cit86 style help menus
nested bulletin menus
multiple args for .rk .rb .ri .rd 
[Lobby] Edit Command:
if pausebetween messages is on pause during wildcard download.
when logging in print Welcome back immediately.
in known rooms optionally highlight current room / known halls read halls	=>Wow<=
character pacing
rotating #softverb
more than one #sysop
.shg .sgu prompt [ARB]
when you choose an option letter  from console menu highlight option
Password protected rooms/applications
startup/shutdown/chat tune
bell pitch. random pitch
sticky room/sticky hall
you are here classic
configurable backspace can be either previous room or jumpback
in kill hall..prompt if you want to kill every room
   in kill group if rooms belong to group go through every room and
   ask if you want to kill the room.. if not then make it public.
last room, last hall, default room, (default room &| hall lock) (dungeon) 
apl_realname
border screensaver
#borderchance, specify random or sequential too.
sysop config by user amount of idle time
be able to set anonauthor on per room basis
Don't display message from Sysop @ another board
have replying work for .RAE
when incorporating net 69 if not netcanseeroom incorporate the message but make them moderated.
	later unmoderate it if needed (during duplicate check).
usenet style moderating
-#0 turn off port access
\: next dir
.ECA before anything else: no ask confirm on abort
Alt+Number: Force cron
file_id.diz - .rvi...
^AU/^Au - ^AN/^An without color... good idea?
Check disk space before attempting to resize files
When rebuilding tables after resize, say that we aren't on crack
.AF: prompt for blank ones
for routing have aliases work.
--->> if doing read all and you release msgs it goes in room you are in.
add bit to userlog for every room whether or not moderator/host of room?
in .K(v)I have it print out which users have found hidden room or which users
	are in the BIO room.
linked cron events
.AC>opy file
put last call time in .RC
add STUB and BOGUS message types to read status. make it so bad message 
	requests won't harm anything
key to set bypass pointer to last read in room
upload download ratio
sysop configurable to set node status in .ec
upload download privileges by user
in global edit things have yes/no/return/back
circular message table
.read censored .read networked .read group only etc..
!exclude... exclude becomes include. for .ec when toggling it
	it asks you if you want to change the stat (not any value) general use !
do applications from getchar.. anytime..
ctrl codes for : bell, cls, home cursor, curs. up, down, right left
add internal cofiguration menu
make it so you can call ctdl with inits;pw and name and create the account
reset idle when ring (when not using dial_ring)
read by message number accept a range of message numbers
Specify range to mark in queue menu.
configurable message headers
check hard drive space when resizing message/log file
prune user command when reconfiguring.
Reprint and Previous Keys for message reading
add console colors attribute keywords to config.cit
better #zip field checking
global twit/untwit feature
set environment variable for being shelled
for net 1.1  save room requests to filename using alias in nodes.cit if alias 
	exists there and copy it to the transpath.
add a heading for known rooms... "Rooms you last posted in..." 
	and list the rooms where the last old before the new is a message
	from the currently logged user... 
combine aide and sysop menu. set which items individual users can use. 
investigate default room path
  .AE: show what was toggled, not just outcome, in aide msg
  .K#, .KV: indent each room's line
  .RU: flags in front
  .RU: put aide/sysop flags at beginning of line, not end
  .RVU: even out lines, date width
  .SCE: check against CRON.TAB
  .SN: shouldn't work on open-access system
  Entry cmd: Upload 	-- just set %f=something, append it
  Show prompts while entering email (e.g. To: username, etc).
  30 character room names look funny in message gathering and cleanup
  #HOURS/#DAYS should be bitfields (netting)
  Add FredCit Cron stuff (commands, CRON.TAB)
  Separate #TWITFEATURES keywords
  Use only one function for displaying the message header
  Limit amount of time spent as a new user (stupid scripts)
  Limit amount of idle time in chat mode (one hour)
  INT 2Fh call while idle (for Windows, OS/2, power mgmt, etc)
  e91Oct31 If borders=2 or 3, must be aide or sysop to edit (MISC.C/editBorder)
  e91Oct18 Maximum word length is terminal width (OUT.C/mFormat)
  i91Sep26 Directories can be cron sorted and reversed (FILE.C/readdirectory)
  91Mar21 Don't print trailing spaces on .RU for non-aide/node (LOG3.C/Readlog)


 backout & gag & auto reverse
  Entry cmd: Group/Limited
  Crashout() should use va_args, etc
  Entry cmd: Exclusive/Mail
 in err heads robustness go through and fix message table
put results in external file such as bauds cit
toggle from edit menu to allow escapes
unexcludable room bit
user biographies
internal cit2door 
make net69 work with internal zmodem
way to hook #PROTOCOL in external.cit to internal stuff
#noconlog
encrypted message exclusion
Command to convert word list to dictionary file
Multi group rooms/halls
another keyword for whether or not aide message when a new node is added to route.cit
.ar also change entry in infofile
 Roombuf. add full moderator string and exclusive net partner string to room file.
	  moderator hash and host hash will be same string (ask errhead about that)
 Logbuf, lasthall, lastroom and hallhash be full strings.
if nmessages is too low. netting will hose out.
 fix .AK (kill room).
 dont let strings end in Ctrl-A
 step over ansi codes for non ansi users
 Ctrl A-5 code turn formatting off
 ctrl codes for date, username..
 don't disable echo for sysop messages
 fix chat mode bell
 Zap toggles zappedness of event 
 reset event unzapps event
 unzap event function
 for attributes on regular ansi use default ansi colors not config.cit colors
 access groups for netting is screwed up
 edit your name
 fix extremely occasional passing of (U) US field in gremcit messages.
 convert float to int on input.apl(bad value 39)
 fix echo of sysop messages
 test movehall
 local/manual netting
 variable to keep track of actual connect rate use it for dltime.
 show both dte and connect baud rates in read status
 keep track of rate user connected at 
 when a node calls you it doesn't update the cron list.
 net 6_9
 don't display date/time for anon messages
 skip over ansi codes if ansi is turned off
 .ed <space> <return> should use current hall
 variable in log.. log.. is poop count for users..
 is # of fetches...after x # of fetches include roomreq.(cfg.alias)
  make room request.  set it to zero.
 if it reaches request fequency send roomreq.sky
 maintenance room or .RG (read global) stuff.
--------------------------------------------
 on status line 
 port rate if dowhat == DIALOUT
 connect rate on status line if connected.
 port	  rate if not connected
--------------------------------------------
 write src id of net e-mail
 doubling check of net e-mail
 add optional prompt for printer file name
 error message stuff
 don't do aide message for self(killed messages)
 fix reconfig so it doesn't print out keywords
 user configurable user signature
 censor!
 mass e-mail to a bunch of users (group) e-mail
 fix maven's getnode bug.
 #minbaud .. toolow.blb
 enter-configuration two columns display for menu
 invisible bit for messages
 configurable sleeping call again string.
 sysop to be able to lock user signatures
 #replace for pure obnoxiousness
 group in, group add, group delete functions to aplic. 
 #sysop_name to output.apl
 locked group should permit .rlu
 countdown timer for sleeping call again
 floor mode should be subhubs 4
 ask if add everyone to group when creating new group
 group only aide messages 
 make configurable whether or not to restore screen mode after apsystem
 <more> prompt in chat mode
 <don't echo filename prompe when doing printer.>
 trash generation #'s.. Have 3 new log files: lbgroup, lbhidden, lbignore.
 convert program for 61
 convert program to large version of 61
 configurable twirly string
 fix group moderators shit group moderators can release only their own msgs.
 enter message saying "room created by" when creating a room.
 when netting #GATEWAY in nodes.cit write to 'd' field.
 Fix alt6password shit 
 have file input append to message buffer
 sysop not able to give take away sysop access
 delete message buffer
 #softverb
 do .ru when .ee ?
 add .RNU .ROU
 Non numeric source id checking.
 if  .TVQ need to print out time and doit it if autoverbose is on.
 fredcit ads
 trap incorrect initials & pw
 #MAXROOMS #MAXHALLS #MAGROUPS in config.cit.
 #chatwhy asks user for reason to chat. and if chatmail is on reason becomes
		   subject.
 add 'U' (country) field
 restore border color when coming back from shell
 colors are screwed up upon reconfigure
 have border flash for chat mode
 make screensaver update screen while blanked
 the turbocit abliity to have file of commands in #login string.
 macro keys
 stupid border color change stuff 
 message to sysop upon chat request when chat is off
 some kind of waiting for caller screen (with events)
 status screen (aux mono)
 allow escape (27) through
 user configurable prompt
 ask if you want to make non existant directories in config
 verify .enter password
 changing pw confirmation
 aide command to go to aide room in maintenance hall
 sort files by date for net 69 incorporation
 richard's nifty little screen change that deals with background colors
 keystroke to go to lobby whatever the name
 showuser blanks the name field of the screen
 fix messages generated by sysop commands i.e. usr blah verified by local message even if nobody's logged in.
 #WYSIWYG 2 User's colors are always shown on console.
 #WYSIWYG 3 Only when logged in on console do user's colors show up.
 #WYSIWYG 4 Even if user has ansi off still show ansi on local
 (TCIT) after .et confirm if you want to save file.
 Config.cit #dialringwait (# seconds between "RING" and answering)
 bug when shelling out to external editor extra spaces are added to output file
 if bios set to 1 when coming back from scrollback buffer it loses cursor position
 have alt6password work correctly with ctrl-f6
 implement BIO rooms
 command to list all users who can see a hidden/bio room.
 add someone to hidden room, kick someone out of hidden room.
 fix the -nc and -nb switches 
 known hidden rooms
 known bio rooms
 auto add bio rooms
 be able to hide public rooms from users.. use hidden bit.
 add another bit to userlog. when set, room is hidden and they cannot go to it.
 lbhidden when off, room is hidden. when on you can see it.
 move pgrpno into room table to fix problem if you kill a group but it was a room's privileges group.. doesn't check
 rewrite all that disgusting file directory shit.
 after bulletin menu have it say please wait.
 group edit menu. hall edit menu.
 have a delay before #dial ring actually answeres the phone.
 test com3 and com4 support
 investigate bypass,goto
 Network only protocol
 entire log table (usernames) in memory
 clean up duplicate message code (code to copy messages)
 make it so you don't have to have unique pw through out the system
 the algolrithm. fix default hall. say how many new messages. .rg
 what to do about bug in netmail response.. sends funky message stub
 fix buildaddress so that it won't add usenet shit
 formatting on .s%
 always report 69 file transfer in aide room.
 can't set your address to something that is already there
 fix known rooms
 rethink "warning, unknown destination fuck"
 case '\b' equals previos room
 progress for build address twirly cursor in brackets 
 #messages #new in known room info
 investigate what happens when no #address in route.cit
 no nodes.cit entry required for fetching 
 if data file is zero length. delete it.
 ctrl a-n screws up mail causes it to say you have mail in mailroom when you don't
 have sysop 'o' command not work if you are not on console.
 default group and hall for #AUTOROOM
 check to make sure message.dat is up to date
 bug if you have a protocol set to not clear screen, when returns it looks nasty!
 investigate auto next hall
 clean up new user stuff.
 .rn <amount>
 update cron for a board that calls in (mystery cron bug)
 #default account
 add node alias to log buffer
 cursor positioning is still a bit screwy
 if you unlink a file have it delete the comment from fileinfo.cit
 change inputapl & output.apl so it does CR/LF combinations properly.
 bit in userlog whether or not user can create rooms
 change the way cit crashes out of citadel.
 for net69 don't create zero length mail file.
 fix #nopwecho
 hidden/shared rooms has some sort of problem.
 dont pause between.... in mail messages msgpos and clear screen
 .ae should not force you to edit the current room
 be able to start cit with different comm port
 cron thing to be able set done time to a future time.
 bb. more consistancy about hyphen before "-only" in read status
 bb. .k0 should talk about messageless rooms not no unseen messages
 bb. .ecz should have no menu initially
 bb. network event in debug mode have baud rate be printed out as 2400 not 2
 bb. when .koe is implemented .ke will become .kne plus .koe. 
 #lexpath for dictionary file
 have cit not crash out if you specify a: at edit room
 On .RBU .RBM and .RKR default to last thing used.
 add xms/ems overlay switches to the config.cit file
 fix stupid getstring bug
 #errors for getyesno and getstring have systemtimeout work at getyesno prompt
 cleanup building address
 .SHK prompt for which hall to kill
 make if configurable if goes off hook while incorporating
 in net1_1 during buildaddress it occurs before incorporating instead of after
 percentage thing isn't showing when node calls raft   getnetmsg in dosysop.c??
 in .ss if user is not in a group it has the groups: line and then has options line
 bb defuser.cit doesn't work properly
 ansi music
 personal hall
 when encorporating messages if offhook 1 go offhook during encorporation
 put command line in read verbose status
 Proper Hs-Link Support
 show node information in show user
 optional second arg to roomok to limit # of new rooms created
 send connect rate to applications
 at startup if etc.tab is the wrong size say that etc.tab is the wrong
  version instead of saying that there isn't one.
 .shg should prompt for hallname
 document changes to etc.tab
 do supershell if regular one fails
 if etc.tab is wrong length then reconfig
 redo ctdl -U "wow"... create wow. don't allow different name..ask for initials and pw..
 fix extra space before one moment please
 "destinaton" misspelled (Entry command: @)
 ;;mavencit: won't do "\"
 .AM: include file description
 Building addresses: every x seconds (rg)
 partial hall recognition..................
 your brain
 .r6 userlog
 Document .S> in ctdl.mnu (ought to check for all commands)
 last 10 users displayed when you log in.
 .RVD show total bytes
 e92Jun06 .AH aide message is group-only for room's group (SYSH.C/xhallfunc)
 e92Jun06 If .ER fails, go to current room (ROOM2.C/makeRoom)
 e92May11?"Message base initialized" in Lobby when init'd (CFG.C/zapMsgFile)
 e92Apr29 <K>, .AI: aide message group only (MSG3.C/deleteMessage)
 e92Apr29?.SGG, .SGU:..NOT! aide message group only (SYSG.C/globalgroup,globaluser)
 e92Apr29?.SHG: aide message group only (SYSH.C/globalhall)
 e92Apr15 <K><S>, <M><S> work while reading (MSG3.C/showMessages)
 e92Mar24 When logging in, period for verb if debug off (NET_OUT.C/n_login)
 e92Mar24 Barf when error occurs when zapping msg base (CFG.C/zapMsgFile)
 e92Jan13 .AL doesn't take a long time to abort (SYSG.C/listgroup)
 e92Jan07 Search/replace won't show on console for email (INPUT.C/getString)
 e92Jan01 When building room table, show endpoint (CFG.C/RoomTabBld)
 e92Jan01 When building log table, show endpoint (CFG.C/logInit)
 e92Jan01 When building hall file, show endpoint (CFG.C/buildhalls)
 e91Dec23?Doesn't prompt to release msgs in Aide/Dump (MSG3.C/showMessages)
 e91Nov22 Display greeting for subboard users (CTDL.C/main)
 e91Nov10 Allow marking/killing messages while in header (MSG3.C/printMessage)
 e91Nov10 Better bad login string trapping (NET_OUT.C/n_login)
 e91Nov10 Fixed #SHOWMOVED (MSG3.C/printheader)
 e91Oct31 If #SHOWMOVED 1, show where msg was from (MSG3.C/printheader)
 e91Oct18 Made %I in datestamp work, thanks Angela Davis (TIME.C/sstrftime)
 e91Oct17 Lists usage when using unknown option (CTDL.C/main)
 e91Oct15 Go offhook when exiting dialout only if logged in (MISC2.C/dial_out)
 e91Oct15 When killing message, tell room in Aide msg (MSG3.C/deleteMessage)
 e91Oct15 .AS puts changed file description in room (INFO.C/setfileinfo)
 e91Oct15 .AF puts new file descriptions in room (CTDL.C/doAide)
 e91Jul26 Set marked message ID to 0 when logging in (LOG2.C/login)
 e91Jul26 If message ID is 0, can't .AI (MSG3.C/copymessage)
 e91Jul26 If invalid login string, tell sysop (NET.C/n_login)
 e91Jun11 Display BULLETIN.BLB for new users, for Livia (LOG2.C/login)
 e91May29 K allows jumping (ROOM.C/listRooms)
 e91Apr22 EXTERNAL.CIT lines can be up to 120 characters (CFG.C/readprotocols)
 91Apr09 Show locally who replied mail is for (Ibid)
 91Mar17 Put in CrT's code adjustment (FMT.C/sformat)
 91Mar03 Put timeout in .RS ("Maximum inactive time:") (MISC2.C/systat)
  ~ doesn't toggle ANSI
  .A/.S done by "[console user]" when not logged in
  .AE: if 'E', ask for net ID
  .AH: allow partial room names
 *.AH: Change room or hall? (R/H/A)[R]
  .AL: should ask for group on second line
  .AI/.AK: put message number in aide message
 *.AQ: Multiple message marking (Clear, Del/Ins, List, Sort, V+)
  .AR..NOT! .AM puts file description message in new room
  B, J doesn't give correct number of new messages
  .D/.U, Ask if logoff after batch transfer
  .EC: toggle for borders
  .EC: surname/title toggle shouldn't work if globally turned off
  .EE u@n{@,}r{@,}c
  .EE sysop@unknown should not work
		when users kill their own message move into old buffer.
  .ER: put first message in room ("Room %s created by %s")
  .ES: if surnames off, still display ".Enter Surnames/Titles"
  .E*: put room name in message, make sure file exists
  .KP: known Permanent rooms
  .KY: known anonYmous rooms
  .RC: don't show title/surname visibility if globally turned off
  .RD: put filename prompt on next line
  .RND, .ROD: Allow sorting of directories by date/time
  .RI: put filename prompt on next line
  .RLU: allow for locked groups
  .RVT: if not found, show "No file", not "No helpfile"
 .RVU, .RVVU: should have 30 chars for username
  .RZ: use FV or RV or MAD
  .RZ: put filename prompt on next line
  .SCF: ? should act like .SCL (similar to .G?=K)
  .SE: split into .SEG, .SEC, .SEE; remove .SCE (tiny module)
  .SHF: use "in the hall name" partial hall ability
  .SU: should have proper default for user name
 .S!, .S@: close print file (ALT+P) if open
  Entry cmd: _ (signature line)
  File-linked messages should net out
  Trap circularly routed mail
  Offset time in anon messages
  Rcht/rcht on status line should blink
  ^A when not acceptable should print nothing instead of space
  Colors in dial-out mode
  Put in ANSI-MONO terminal type
  Change <Verb> to (Verb) or make it configurable
  Fix screen pause for new users
  Opt to create directories when config'ing
  #ALIAS "six letters"
  #KILL: remove
  #NOPWECHO 0 should echo what user types
  #NOPWECHO 1 should echo nothing
  #OFFHOOK should be configurable
  Countdown timer 30 seconds before auto-log-off
 *By user: make bold/underline/etc have configurable colors
			make individual signature lines
 *Partial user name recognition
  Allow "ANSI" in title/surname
  -E command line switch for partial reconfigure
  -L command line switch for local mode (for subboard/door)
  Read borders from CONFIG.CIT, GremCit-style
  Make partialgroup do like Goto: exact, starting, substring
  Allow LABELSIZE characters for various fields (instead of NAMESIZE)
  Chat: display CHAT.BLB, rotate it.
  Allow replies to "Sysop" mail, author=sysop
  Allow replies to "Aide" mail, author=aide
 *Implement hall descriptions
 Put all messages into an external file
 *Look for both verbose and non-verbose result codes simultaneously
 *Reduce message table size (bytes/message)
  Don't ask for reply to email to Sysop @ remotenode, only localnode or !node
 if you edit a bio room everyone becomes invited
 in .rvd say how many total bytes (like dos) for listed files.
 .sgu default to current user
 Console timeouts are randomly broken - Didn't time out at "Enter as new user?" prompt, need to track down?
Partial recognition for ALL group stuff except partial group. ALL hall stuff except partial hall
	disambiguate all.
 make sure 'sleeping call again' works
 .rg is broken
 remove .s$
 need cr if wrong address entered on .ec&
 debug 1k xmodem 
 add "w "upload" add leading spaces.
 alphabetical order for .ew?
 clear screen for shelling if #BIOS 1
 1k xmodem support like gremcit
 .rt bug with files larger than 32k
 highlighted letters for ALL menus include aide edit room
 when exiting cursor ends up in the wrong place
 if maxrooms is too big system will crash with no warning
 if #nmessages is to big (10000) not all memory will be dealocated
 make sure censoring twitting etc work perfectly
 debug zmodem
 if maxlogtab is two only one user is allowed on the system
 resizing log file does not work
alt+f and zapped
result codes
.m slow
check account poop between messages
ESC: abort fetch
compression problem
f4 - ^f6
#initbaud: make new thing; accept 0-x, 300, 600, 1200...
#verbose 0
.sp: trap poop
replace and MCI
#roomok, etc.
mci enabled on sld
#newuserapp and #login application
#altf3timeout
alt+f1 even when console locked
message encryption: not flagged
hooks to script when mail.xxx/mesg.tmp
.ki: auto-app
%u: user name
.login when logged in: no docr()
#call runapplication: return code
 marking/killing etc of messages does not work.
 wildcard match for .h internal helpfiles
 make an outconraw functions
 resizing room file on reg version is broken
 rezizing groups is broken
 livia's father's volkswagon in volkswagon menu
 errhead's old volkswagon 411
 .S+ in menu
 .ah .aw should be disabled when in personal hall
 beautify resizing output 
 when using personal hall the '>' or '<' should make you not use it anymore
 prompt after .paa or .pal (any function that adds many rooms)
 put a cr before roomcount when doing a goto in a personal hall
 .pl
 extra cr when doing .EP before verifying my old password
 user configurable comma technology
 commas in filesizes when disambiguating and after an upload and
 when you move a file (the message moving a file creates)
 default .rt
 need cr when doing .h wow?
 bug in non-excludable rooms backwards prompt
 upon program exit print out some stats such as how long up time was etc..
 write original room name to messages
 .Finger
 sysop to configure presense of personal hallway
 change 'message' to cfg.msgnym.
 'p' should not go to next message when message pause is on
 user config more prompt
 fix medium-kludge <76 chars><return><wow><return> screws up
 inconsistant "  this menu"  " -- this menu"
 fix .kw
 merge .ec and .su
 .SU: if expert, don't show menu initially
 key to send exclusive mail to message you are reading
 roomnyms, hallnyms, usernyms, groupnyms
 Moved "List in Userlog" in configure to "L" instead of "U"
 Added signatures, borderlines, titles/surnames on/off by user in .EC
 Added user signature in .EC
 User configurable colors in .EC, code from GremCit.
 C during a text dump (message read, blurb, etc) now turns screen pause off
	until a room prompt is reached.
 E during a message read now sends mail to the author of the message.


  Added a SEQUENCE command to #LOGIN scripts... R then 3 parameters. First
  parameter is what to wait for, second is what to send if it's not recieved
  in #WAIT_TIMEOUT, third is how many times to retry.
  For example, to wait for the string "login:", sending a carriage-return
  until you get it, and trying 5 times... then sending your initials and 
  password, the following script would work:
 #LOGIN R "login:" "\r" 5 S "initials;password\r"

 Fixed Purge-Users to have an Abort option

  .Sysop Group List has been added as a synonym for .Aide List

  Added command .Sysop Purge-Users, prompts yes/no for each user in the userlog
  to kill the user- Starts at the oldest.

	 The current time of the day is now displayed at login right before the
  last time the user called. This is if logon stats are turned on.

	 Added code to prompt if a message should be generated in the room you
  copy/move a file to.

	 "-p#" Lets you specify a different COM port then what is in
  CONFIG.CIT. You might use this to allow special connection to different
  modems, or when running TurboCit under a front end program that allows
  more then one line.

	 Added "%" to the sysop menu as "Sysop Fullpath File Download". A
  remote sysop can download almost any file using this command. Any path
  is valid, but certain files are still not visible. IE: CONFIG.CIT

  Added partial name entry for groups in the hall new and rename.

	 Added a new AIDE command .AJ, .Aide Jump to aide room and maintenance
  hall. It's a mouth full, but makes it easy to jump back to the aide
  room and maintenance hall at any time. At this time it does not allow
  you to "jump" back to the room and hall you were in. That will come
  later. In the future it will toggle you between the room nad hall you
  are in and the aide and maintenance hall.

	 Added a new feature. TurboCit will now prompt a user to leave e-mail
  to the sysop if they requested chat when they were on. Before asking the
  user to leave mail, the file "CHATTED.BLB" is read to the user.

	Changed the chat bell to only ring if bells are ON.

	 Added default hall locking to the list of items that a new user can
  have defaulted on if you like.

	Cleaned up the way "hall new" and "hall rename" display and ask
 for information. These will be changed to a menu system soon.

	Added code so you can lock a single hall from users making new rooms.
 The status of this can be changed by re-naming the hall with no new
 name. TurboCit will then ask you about this as well as the other
 settings for halls.

 New CONFIG.CIT keyword, #MAX_JUMPBACK... configures the # of gotos which are
 saved for jumping back to them. Generally, setting this to about half the
 # of rooms on your system is more than adequate. Minimum of 2, for deep magic
 reasons.

 Known Rooms now no longer lists Xcluded rooms with no new messages in the
 "Rooms with no new messages" part of the list.

	Added "#AUTO_EDITOR" in EXTERNAL.CIT which allows the configuration of
 an editor that will automatically be run whenever a message is saved.
 Uses include auto word filters, bad character filters etc...

	Added the ability for users to turn off viewing of title/surnames
 on message headers. This does not override the #SURNAMES setting in
 CONFIG.CIT where you can turn off network titles/surnames. This just
 allows each user to not view titles and surnames if they can be viewed.

	 E-mail can now be entered from a shell using the input.apl and
  message.apl files. ASCII '' (201) is the character to use for the
  name of the user to send mail to.

 Added a new command to the #LOGIN string in NODES.CIT '@ "filename"'.
 This allows you to call another file containing more lines of login
 commands. One command per line. The file must be located in your homepath.
 The file cannot call other files with the '@' command. If the '@'
 command is used inside a file, it is ignored. You can call more then
 one file, but only one at a time.

 Example:
 <nodes.cit>
 -------------------------
 #LOGIN  @ "file.txt"
 -------------------------

 <file.txt>
 -------------------------
 p "10"
 w "hello"
 s "s"
 w "Enter your initials: "
 s "init;pass\r"
 -------------------------

 .RB should default to logged in user
 .RK should check everything else.
  Wildcard downloads now disambiguate filespecs
  * at a room prompt will bring up the bulletin menu

 ALT-F now forces the "next" event (the one the pointer is at) no
 matter what. The event is done whether it is valid, or has been done
 already.

 Added a flag in NODES.CIT to let you trap failed nets on a node by
 node basis.  The flag is "#NETFAIL" and a "0" means NO, a "1" means yes.
 If network event trapping is turned off in the CONFIG.CIT file, the
 failed nets are not trapped even if #NETFAIL = 1.


 default room creation hall
 fix applications baud rate
 carrrier detect and aborting from netting
 support for two way net
 investigate netid's with e-mail
 helpaide	> -> 0 everyone, 1 aides and sysops, 2 sysops only, 3 #sysop only,
			>	 4 nobody, -1 only probem users.  helpsysop >
 autorouter
 twit bbs name
 have squiggly be on status line ANYTIME up-hours is on. have alt-u make
 board NOT answer phone and remove squiggly
 null pointer check for Borland
 configurable status bar.. Status lights
 cron event to set idle wait
 new net commands
 group limited events (cron)
 send enquiry character at enter initials prompt
 improve applications
 ctrl -A char send exact ansi sequence
 from build address to building address
 on f4 screen there are separate events for console login login username
  richard suggest combining them
 .RB should use hashes in message table
 .Known .Time 
	Friday, August 6, 1993, 6:39:48 AM (PDT) 
	Total time online:	00:05:35 
	Total logon time:	00:03:31 
	You have 55.23 minutes left today. 
	# of downloads 0
 fix dropping carrier as new user
 add blank line to swapping please wait.
 dub dub stuff
 e92Apr25?Does #NEWUSERAPP if not empty string and #PRIVATE 0 (LOG2.C/login)
 e91Oct14 If no group specified, mf.mfLim=FALSE (GRPH.C/getgroup)
  .AE: if 'W', turn on shared
  .EC: unlisted doesn't take effect immediately
 Beep is disabled when backspacing in ; one-line chat.
 *.EO: should erase last posted message, move into editor
  .ER: shouldn't need to be logged in
  .RU: pauses at end for Brent, why?
  .SU: when account becomes node, remove from Null group
  .SU: when account is denoded, add to Null group
  <K> should delete networked email (don't let it go out)
  F8 should exit chat mode / dial-out mode, reduce delay
  Command for heapwalk (what's FredCit's mem?)
  Messages entered in group-only room are group-only???
  Check NODES.CIT only if node has userlog entry
  Make sure node name matches before adding region (NET.C/GetMessage)
  Duplicate messages should net out (.AI, printmessage)
  #DEFAULT_ROUTE (for unknown nodes)
  #DIRECTORY for err head: send all files in this directory
  #FILELIST: name of file in transpath containing list of files to send
  Make "crazy network" mode where Retry=0 for everything, calls until
 all networking done
  Make sysop command for anon messages
  fix UW ANSI screen screw-ups (dial_out mode), for Livia
  Only redo files if necessary
  #NOPWECHO 2-31, 127+ should not be allowed
  Put terminal width init into GLOB.H, not CFGCFG.C
  Removed Alt-B Psycho characters.

 Replaced the Alt-B command to toggle "blinking" chat on and off. The
 default is off. The setting is remembered between configurations.
 IE: stored inside ETC.TAB

 If Sysop functions are trapped in trap.out, userlog edits will now be
 duplicated in the aide room.

 Added a call to application code to only write an OUTPUT.APL file if
 there is at least 200K free disk space on the drive where the
 application directory is located.

 F-4 now clears the screen and displays "Echo Off". All output
 including the status bar and help are turned off.

/*************************************************************************/


	Fixed upload count credit for batch uploads if the balance was already
  below 0. It was resetting to 0 and then subtracting even when it was
  below 0.

	Added the word "using" after the Download and Upload prompt. This in
  it self should help a great number of people that don't realize you
  should now hit the protocol "hotkey".

	Added a flashing solid white screen during chat request. People have
  ask for this because they are hard of hearing and or have disconnected
  the PC speaker.

	Changing directory code now "retries" once before aborting. This
  should help on networks.

	Status line display of baud rates when running TurboCit under front
  end software or as a sub board now displays the port rate instead of the
  init_baud rate.

	First count of lines of code, total is 28,000+ including header files
  for TurboCit (not BC++ 3.0 headers).

	Increased word length in messages to 512 characters. This might be
  needed to support long lines of ANSI color codes.

	All directory paths are now check twice at startup.

	Added code to filter out messages that only contain ANSI color codes.
  This is added to the code that filters messages with spaces only, or
  lines of space-<CR> space-<CR> over and over.

	Changed the auto ANSI detect a bit. It now requests 3 times, but stops
	requesting as soon as it gets a response.

	TurboCit now reports the number of rooms requested and asked for. It
  also reports the number of messages sent as well. This does not include
  mail.

  Changed .KI to ask all users if they want to view the room description
  file. Before only users with room descriptions turned on were asked.

  Changed the status bar to include a 'R' flag to show "Remote-Sysop"
  status like "Aide" and "Sysop" status.

  Changed the userlog reading code to display a "Remote-Sysop" flag.

  The start time and the estimated time a download will take are now
  shown on the top of the TCit protocol window.

  @ at the room edit menu toggles the Automatic Application flag if the room
  has an application. If this flag is set, the first time a user enters the
  room in a call the application will be called automatically.

  Printer file now actually gets re-opened after shell.

  Removed roomtalley-for-unlogged-user code from startup and terminate, speeds
  things up noticeably.

  New (optional) NODES.CIT keyword- #PREFIX, if present, will be used to dial
  a node instead of the default config.cit #DIAL_PREF

  Net message replies now copy region and country information if present.

  New External.Cit Keyword- #FILEMAIL... Replaces the old "NODE@NODE" code,
  if you define a username as a #FILEMAIL account, any incoming netted messages
  will be written to a file. For example, to duplicate the node@node code, put
  the following line in your external.cit -
  #FILEMAIL "Board Name" "OUTPUT.NET"
  (Replacing Board name with the obvious thing)

  New config.cit keyword, "#PSEUDONYMS", if set to 1 will prompt for a 
  real name after the account name is entered. This field will be stored
  in networking to make connecting to real name only nets easier to interface
  with, but is not displayed in CitNet headers. 

  Exclusive messages are no longer blanked to console when the message is sent 
  to "Sysop", "Aide" or the config.cit #SYSOPNAME

  Modifed the user application code to allow unix wildcards. For example, to 
  set up a login application for everyone, Set up a user application with the
  username as "*" ... To set one up for anyone with the letter X in their
  nym, use the username "*X*" ... This is all case insensitive.

  Reworked the "Copied" messages code so that messages are PHYSICALLY copied
  instead of just having a pointer aimed at them. This makes the code a LOT
  less confusing in that part, and should make the Aide room messages, etc
  work again.

  Killing a message now moves the message to dump and puts a notation in the
  aide room as to the message number killed rather than including a whole 
  'nother copy of the message.

  Inserting a messages now only puts a message in the aide room with the 
  message inserted rather than including a whole 'nother copy of the message.

  Copied messages now net out properly.

  Fixed a minor bug which could put a logging in user in the last hall the 
  previous user was in UNLESS they had a default hall set.

  Fixed a bug in the sysopPage() function which could lock up some machines
  because it specified a negative time to delay.

  .RVU now shows SYSOPS the real name of the users

  Fixed the partial-room code to deal with "start of a room name" at the same
  time as "in the room name", so you'll be able to get to comp.misc even if
  there's a "Misc Blatherings" room, by typing .G misc

  Added the code to do true pointers (instead of 16 calls back), the pointer
  edit menu has changed SIGNIFICANTLY due to this.

  Finished making # of groups configurable in config.cit ... the only caveat
  is you still can't have more than 64 group translation lies in a NODES.CIT
  entry. If you need this to be changed, please tell me.

  Fixed some bugs in the message base configuration code, Where the first 
  message in the base could get munged if it was the last message logically.

  Terminal emulation code is now almost completely implemented. A new termcap
  is forthcoming shortly with emulations for the DEC VT-102 and Wyse 50.
  If you or any of your users has access to information on terminals, please   
  send it to me for inclusion in the database.

  Fixed a problem in the parsing code which had some problems with 3-character
  octal codes and 2-character hex codes.

  Fixed a bug in the netting code which would update pointers at fetch time 
  instead of after incorporation, making it fetch any messages received during
  one network on the next net.

  Added #DOORHOURS keyword to external.cit, see the new external.cit for 
  details.

  F during a message read now posts a "followup" public reply with the same
  subject line and the ability to quote message text.

  T will now read the "Thread" of a message, if it has a subject line, 
  printing only messages with the same subject

  New #TRAP keyword: SHELL, logs cron shell events in the trapfile if present

  If #FLIPCENSOR is set to 2 in config.cit, Read Censored Messages will default
  to on.

  New CONFIG.CIT keywords #QUOTE_OK, #LOGPURGE, #NOCONLOG:
  #QUOTE_OK determines whether message followups will be allowed to quote
  from the message.
  #LOGPURGE is the maximum number of days a user can not call before being
  removed from the user log, regardless of their permanent status. Set this
  to 0 to ignore it.
  You may be surprised the first time you enable this... I set it for 120 days
  (4 months)... And purged almost 2/3 of my userlog. Since the purpose of this
  is to not have to keep zapping permanent users who haven't called in ever and
  ever, I'd set it at a minimum of 6 months, possibly 8... 
  #NOCONLOG, if set to 1, will not trap console actions. This can be useful
  if you're the only person who is logging in on console and you just don't
  CARE what you did.

  Fixed a bug in downloads which could allow screen-pause AFTER the download
  had been started.
