SYSTEM: C.A.B. from Delaware
   LOCAT: c1:BBS/
   SYSOP: Chuck Maier

USERS:
   ACCOUNTS: 1500
   GUEST:
      STSEC:0
      BDSEC:0
      LBSEC:0
      BUSEC:0
      TIME:1200
   NEW:
      STSEC:1
      BDSEC:1
      LBSEC:1
      BUSEC:1
      TIME:1840
   VALID:
      STSEC:2
      BDSEC:2
      LBSEC:2
      BUSEC:2
      TIME:3200

                           the parameter 'express' (below under mail) is to
                           allow express-mail. a '1' allows. a '0'disallows.
                           a '2' makes all mail get express'ed.

MAIL:
   LOCAT: c2:bbs/mail/
   WRITE: 1,255
   LETTERS: 200
   EXPRESS:2

                         

MODEM:
   OPEN: ATE0M0Q0X1V1S0=0S2=255S10=99S12=2&D2
   RESET: ATH0
   RING: RING
   ANSWER: ATA
   300:CONNECT
   1200:CONNECT 1200
   2400:CONNECT 2400
   4800:not available
   9600:not available
                            the following parameter 'busyout' is a new
                            parameter for rev 2.14 and above. it is used
                            to specify a string to busy-out your bbs phone..
                              1. while you are in local mode ('$' or'space')
                              2. when you hit 'b' while board idle
   BUSYOUT: ATH1

                           the 'trivia' parameter below sets the maximum
                           number of questions. this number of entries is
                           setup in the keys during a 'generate' session!

TRIVIA:500
                            the 'chatcon' entry below is for the chat mode.
                            after the parameter is the actual number of
                            coded keys. from here on, until all keys are
                            assigned, must follow with...
                             kv:  a key number
                             kd:  encoded data
                            the keys are coded by number a=1 z=26.
                                they can be put in the list in any order
                            but only 15 keys can be coded!! When in chat
                            mode... the key is invoked by hitting it while
                            holding down the control <ctrl> key. The data
                            encoded contents will be substituted for this
                            keystroke.
                                there are several keys that you cannot
                            assign as they are already set in TAG...
                            'g' is the bell char (by ascii normal convention)
                            'e' calls online account edit

                                keep in mind... the maximum length of each
                            key (in its decoded form) is 80 characters. a
                            newline (&) decodes to 2 characters!!
                                you can not code any control characters with
                            with this method so a few are provided. don't
                            forget the newline at the end if you want one!

                            & = newline     ^ = bell   ~ = escape(HEX 1B)

abcdefghijklmnopqrstuvwxyz
12345678901234567890123456

CHATCON:6
a KV:1
  DV:&& {?}  <-- Big guy&( V-)&"|Y|"& |||&== == Hi.. Chuck here!!&&

s KV:19
  DV:^:)&&

i KV:9
  DV:&Hello.. ^Chuck here&&

d KV:4
  DV:&Just what the heck do you think!?!?&&&

g KV:7
  DV:^^^

w KV:23
  DV:&Chuck sez:  //\&Welcome to //\\\&Chuck's \\//===\\&TAG BBS  \/    \\\

                          the following parameter is for clock
                          correction. for whatever reason.. the
                          amiga software clock does not keep true
                          and correct time. My amiga 500 loses about 5
                          minutes / day. this parameter will be
                          executed via a cli call at the
                         'change-of-day' time (midnight) to cause
                         your system to correct its 'time' to match the
                         hardware clock. if your machine supports any form
                         of hardware clock set.. place the call to this
                         routine in the parameter... otherwise set the
                         parameter to nothing and it will not be performed!

 CLOCKSTRING: c:setclock opt load

                          the following parameter will limit the # of times
                          that a user may 'ring-your-chime' for a chat per
                          visit. it will not limit his requesting a chat and
                          his request will still be registered in the
                          menu-bars during his visit. the # following the
                          parameter is the number of times he is allowed to
                          bong-you!! The screen 'flash' will still be
                          enabled!!

 BONGPERVISIT: 2
                          the following parameter will control the minimum
                          level that a user must be to hit the chat. i
                          suggest you set this to (at least) a level 1.
                          that way you will be sure you, at least, know
                          their name. also.. a '-1' will effectively disable
                          this parameter's effects!!
 CHATLEVEL: 1

                          The following parameter will cause the bbs to shut
                          down at the local time specified. a user online
                          will get warnings that the bbs is going off the
                          air and he will be disconnected and the bbs shut
                          down at that time. there are a couple of
                          limitations.... as the time can only be set from
                          0030 to 2350!! there are several reasons that this
                          has to be. along with the 'clock-slowdown'...too
                          much happens behind the scenes in the bbs software
                          at midnight to have to shut the bbs down also!!
                          to disable this feature... put a '0'!!


 TIMESHUTDOWN: 0

                          The following parameter is the # of times the BBS
                          software will try and reset the modem at hangup.
                          Some modems require a little more TLC (tender
                          loving care) than others. You can set this to aNY
                          value you wish EXCEPT ZERO!!! It defaults to 3 if
                          the entire parameter is missing.

 MODEMWACKS: 6
                          the following parameter will be displayed at
                          join-time when asking for the user's board name.
                          some sysops have suggested that it be the user's
                          first initial and last name. prompt it here..
                          maximum of 60 characters!!
                          
 BNAMEPROMPT: Enter your ALIAS(max 14 chars)!


